Download document () of 20
Send email
Download
You have exceeded the download limit
3000W 230V Sinewave Inverter Charger. 9000W Peak Surge, 60A MPPT solar controller and 85A AC Charger. 24VDC input. Hardwire AC input/output. Wired Remote, BTS, Software Monitoring Capable.
Delivering Reliable Power Away from Standard AC Outlets
This inverter/charger is a reliable power source for a wide variety of equipment ranging from power tools and pumps to portable lighting and computer equipment in heavy-load conditions. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. It converts stored power from a DC battery source to safe, stable, computer-grade AC power for unlimited runtime.
Recommended for Mobile, Emergency and Remote Sites
Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, this power inverter is ideal for powering tools, saws, motors, pumps, portable lighting, appliances and computer equipment in heavy-load conditions.
Meets Normal and Peak Power Demands
The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS system. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.
Serves as a Battery Charger
When external AC power is supplied and powering connected equipment, this charger/inverter keeps the user-supplied battery charged while simultaneously delivering AC power to connected equipment.
| Product Name |
Eaton Tripp Lite series power inverter and charger
|
| Catalog Number |
APSWX3K24VMPPT
|
| UPC |
037332256461
|
| Product Length/Depth |
7.244 in
|
| Product Height |
20 in
|
| Product Width |
13.75 in
|
| Product Weight |
64.5 lb
|
| Compliances |
REACH
UKCA CE Marked RoHS |
| Certifications |
EN 61000
IEC 62109-1 IEC 62109-2 |
| Product Type |
Power inverter and charger
|
| Battery Charge |
Hybrid selectable 105A max charging system. 45A AC / 60A MPPT Solar Charge Controller
|
| Battery Pack Accessory (Optional) |
Wet/Gel/AGM/SLA/LFP (User Supplied)
|
| Expandable Battery Runtime |
User-supplied 24V DC battery system
|
| Expandable Runtime Description |
Runtime is expandable with any number of user supplied wet-cell, gel-cell, or lithium (w/integrated BMS) type batteries
|
| High Voltage Transfer to Battery Power |
In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 260V (user adjustable to 270 - see manual).
|
| Transfer Time (Line Power to Battery Mode) |
10 milliseconds
|
| Low Voltage Transfer to Battery Power |
In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user adjustable to 180V).
|
| Front Panel LCD Display |
Multi-function LCD displays Input, Output, Configuration, Battery Level, Charging Status, Load status. Left segment displays Input Voltage, Input Frequency, Battery Voltage, PV1 Voltage and Charger Current. Middle display: program settings, flash warning codes, fault codes, parallel system quantity (if configured). Right display segment displays Output Voltage, Output Frequency, Load Percentage, Load Current (VA), Load (watts), DC Discharge Current. Graphical icons for battery and load level (0-24%, 25%-49%, 50-74%, 75-100%), operation mode, and mute operation.
|
| Amperage Rating |
20
|
| Audible Noise |
60dB front side @ 1 meter
|
| Continuous Output Capacity (Watts) |
3000
|
| Cooling Method |
Thermal-controlled fan system
|
| DC System Voltage (VDC) |
|
| Frequency Compatibility Details |
47-65Hz
|
| Front Panel LEDs |
3 LEDs for Operation (Green), Charge (Amber), Fault (Red) Alarm Status. See manual for sequences.
|
| Generator Start Compatibility |
Contact relay signal (NO and NC) contacts
|
| Grounding |
Main grounding lug connects inverter/charger to earth or vehicle chassis ground
|
| Input Connection Type |
DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in terminal strip with cover plate
|
| LED Indicators |
3 LEDs for Operation (Green), Charge (Amber), Fault (Red) Alarm Status. See manual for sequences.
|
| Operating Elevation |
0-6562 ft. (0-2000 m)
|
| Operating Temperature |
0° to 50°C
|
| Output Dry Contact Ports |
Normally open dry contacts provide 5 output alerts for UPS Fault, Overload, AC Fault, Battery Low voltage
|
| Output Frequency Regulation |
50/60Hz. Battery Mode: 50/60Hz +/- 0.3 Hz
|
| Output Voltage Regulation |
LINE POWER (AC): Maintains 220/230/240V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 220/230/240 VAC (+/-10%).
|
| Peak Output Capacity (Watts) |
6000
|
| Power Cord Jacket Type |
SJT
|
| Frequency Compatability |
50/60 Hz
|
| Recommended Electrical Service |
230VAC 30A input circuit breaker (40A for Max AC Charge rate usage). DC INPUT: Requires 24VDC input source capable of delivering the required amperage when used at full continuous capacity - DC requirements increase during overload and peak output operation). PV MPPT INPUT: 30-115VDC Input (145VDC Max Open Circuit Voltage) 1600W Max Solar Panel Configuration
|
| Relative Humidity |
0-95% non-condensing
|
| Solar Panel |
Non-isolated system. Compatible with Mono-crystalline, Poly-crystalline with Grade A rating, and CIGS solar panels.
|
| Storage Temperature Range |
-15° to 60°C
|
| Switches |
3 position on/off/bypass switch. 4 push buttons ESC/up/down//enter. Remote control provides distant on/off control and monitoring of the inverter system when used in conjunction with included remote accessory.
|
| Voltage Compatibility (VDC) |
24
|
| Material |
Metal
|
| Output Receptacles |
Hardwire
C19 |
| Package Contents |
Wired on/off remote
Owner's manual APSWX3K24VMPPT Sine Wave Solar Inverter/Charger |
| Input Nominal Voltage |
220 VAC
230 VAC 240 VAC |
| Product Features |
Expandable Runtime
Pure Sine Wave Output DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in terminal strip with cover plate |
| Product Highlights |
Built-in Maximum Power Point Tracking (MPPT) solar charge controller that optimizes power generation from the solar panels.
Ideal for installation in rural or remote sites including residential, leisure, gas/oil and forestry Priority source selection alternates to deliver whichever power is optimal at the time Delivers pure sine wave 230V AC power from AC or DC sources. Auto-transfer switching option allows the unit to function as an extended-run UPS |
| Nominal Output Voltage |
220V
230V 240V |
| Voltage Compatibility (VAC) |
220 VAC
230 VAC 240 |
Support from Eaton
Product specifications
